Michael J Lance Group Leader, Nuclear Energy Materials Microanalysis Group Contact 865.241.4536 | LANCEM@ORNL.GOV All Publications Characterization of the Benefit of APS Flash Coatings in Improving TBC Lifetime The Impact of Impurities on Alloy Behavior in Supercritical CO2 at 700 Ā°C Methane combustion over Ni/CexZr1āxO2 catalysts: impact of ceria/zirconia ratio Boron-hyperdoped silicon for the selective oxidative dehydrogenation of propane to propylene Onset of Fogging and Degradation in Polyvinyl Toluene-Based Scintillators Primary solidification of ternary compounds in Al-rich AlāCeāMn alloys Impact of Lubricant Oil Additives on the Performance of Pd-Based Three-Way Catalysts Predictive model of scintillator plastic fogging in portals Root cause analysis and solutions for plastic gamma detector degradation in challenging environmentsāAn overview Nature of Moisture-Induced fogging defects in scintillator plastic Compatibility of FeCrAlMo with flowing PbLi at 500Ā°-650āÆĀ°C Reaction-bond composite synthesis of SiC-TiB2 by spark plasma sintering/field-assisted sintering technology (SPS/FAST)... The effect of bond coating surface modification on the performance of atmospheric plasma spray thermal barrier coatings Role of bond coat processing methods on the durability of plasma sprayed thermal barrier systems Water Chemistry and Pressure Effects on Steam Oxidation of Ferritic and Austenitic Steels (EPRI) Effect of APS flash bond coatings and curvature on TBC performance on rod specimens Effect of APS flash bond coatings on furnace cycle lifetime of disks and rods Deactivation of Three-Way Catalysts Coated within Gasoline Particulate Filters by Engine-Oil-Derived Chemicals Remarkable improvement in low temperature performance of model three-way catalysts through solution atomic layer deposition Effect of pressure and impurities on oxidation in supercritical CO2 Reāestablishing the paradigm for evaluating halide salt compatibility to study commercial chloride salts at 600Ā°Cā800Ā°C The Effect of HVOF Bond Coating with APS Flash Coating on TBC Performance 3D Microscopy to Assess the Effect of High Temperature Cyclic Oxidation on the Deformation of Cast and ODS FeCrAlY Alloys The effect of engine operating conditions on exhaust gas recirculation cooler fouling Effects of four-mode hydrothermal aging on three-way catalysts for passive selective catalytic reduction to control emissions from lean-burn gasoline engine Pagination First page Ā« First Previous page ā¹ā¶Ä¹ … Page 2 Current page 3 Page 4 … Next page āŗā¶Äŗ Last page Last Ā» Key Links Organizations Physical Sciences Directorate Materials Science and Technology Division Materials in Extremes Section Nuclear Energy Materials Microanalysis
