Yi Feng Su Technical Senior Staff Member Contact SUY1@ORNL.GOV All Publications Assessing Stainless Steel Compatibility in Flowing FLiBe Salt Corrosion Evaluation of Al-Cu-Mn-Zr Cast Alloys in 3.5% NaCl Solution Investigation of Chemical Species in the Corrosion Barrier Layer on Thermal CO2 Treated AZ91D Magnesium Alloy with Lithium Nitrate Cost-Effective Thermomechanical Processing of Nanostructured Ferritic Alloys: Microstructure and Mechanical Properties Investigation Strength stability at high temperatures for additively manufactured alumina forming austenitic alloy Complete Optimization of LPBF Ni-Based Alloys Down-Selected from FY23 Candidate Materials Including, Thermodynamic Modeling, Sample Fabrication and Microstructure Characterization Effect of Cr content on the hydrothermal corrosion behavior of FeCrAl alloys Advanced neutron absorber Ni-Cr-Mo-Gd alloys seawater corrosion mechanism and susceptibility study... Leveraging Additive Manufacturing to Fabricate High Temperature Alloys With Co-Designed Mechanical Properties and Environment... Liquid metal compatibility of pre-oxidized FeCrAl in flowing Sn Elucidating Polymer Binder Entanglement in Freestanding Sulfide Solid-State Electrolyte Membranes Lithium nitrate salt-assisted CO2 absorption for the formation of corrosion barrier layer on AZ91D magnesium alloy Performance Restoration of Iron Electrodes by Polarity Reversal after Long-Term Surface Fouling in Wastewater Electrocoagulat... Characterization of Oxide Scales Formed on Fe-20Cr-(20-25)Ni Alloys in Supercritical CO2 Evaluation of coated steels in supercritical CO2 Multiscale characterization of an additively manufactured property graded Ni-base alloy for molten-salts\supercritical-CO2 heat exchangers Open-air plasma-assisted deposition of organosilicon coating for corrosion protection of AZ91D Mg alloy... Characterization and Electrochemical Analysis of Acidic Condensate-Induced Corrosion on Aluminized Coating on Steel in Residential Heaters Effects of Cr/Zircaloy-4 coating qualities for enhanced accident tolerant fuel cladding LEVERAGING ADDITIVE MANUFACTURING TO FABRICATE HIGH TEMPERATURE ALLOYS WITH CO-DESIGNED MECHANICAL PROPERTIES AND ENVIRONMENTAL RESISTANCE Internal carburization and scale formation on austenitic steels in supercritical carbon dioxide Characterization of Fe and Cr Dissolution and Reaction Product Formation in Molten Chloride Salts With and Without Impurities... Atmospheric Pressure Plasma Treatment of Magnesium Alloy for Enhanced Coating Adhesion and Corrosion Resistance Challenges in computationally designing high temperature Fe-based austenitic alloys: Addressing the role of Ni additions Evaluation of the interaction between SiC, pre-oxidized FeCrAlMo with aluminized and pre-oxidized Fe-8Cr-2W in flowing PbLi Pagination Current page 1 Page 2 Next page ›â¶Äº Last page Last » Key Links Organizations Physical Sciences Directorate Materials Science and Technology Division Materials in Extremes Section Corrosion Science and Technology Group
